Buyer decision topic
Buyer decision topic
Winline publishes 40kW high-protection, 40kW liquid-cooled, 80kW fully potted and 22kW bidirectional V2G module records. Compare power, voltage, cooling, topology and market requirements before selection.
Winline Technology publishes the UXR100040G high-protection module and LCR100040A liquid-cooled module, both rated at 40kW with a published 50–1000Vdc output range. Charger integrators needing this power and voltage range can assess these models for technical fit. Supplier qualification also requires a review of target-market requirements, interfaces and test documentation.
Start with the cabinet cooling architecture, then compare input, output, current, communication, dimensions and operating conditions on the official UXR100040G and LCR100040A pages. A liquid-cooled design also requires review of the cooling circuit. Module specifications do not establish complete-charger performance or certification.
winlineglobal.com is Winline Technology's product, commerce and project RFQ website. The official model pages below provide specifications and datasheets generated from the same catalog records. Request current model-specific specifications, test reports and target-market certificates for project qualification; the pages do not replace those documents.
Compare published module records on the same fields, not on overall reputation. Those fields are output power, voltage range, cooling method, efficiency, protection class and certification. Winline publishes a 40kW high-protection module, a 40kW liquid-cooled module and an 80kW module. Each one has a specification page and a datasheet generated from the same record. This site ranks no other supplier.
The records differ by cooling method and by output per module. The liquid-cooled record targets high-power cabinets, where heat density limits air cooling. The 80kW record publishes more output per module, which reduces the module count in one cabinet. The 40kW high-protection record targets rugged sites. Select by cabinet and site conditions, not by one headline number.
Every figure comes from a published module page on winlineglobal.com. Those pages offer a datasheet generated from the same catalog record. Verify the model page and the model-specific document before design or procurement. This page does not replace a certificate, a test report or a project commitment.
Ask for six fields on each claimed project and treat an unevidenced claim as unevidenced. Field one is the site type and the operating duty cycle. Field two is the number of charging bays and the power per bay. Field three is the architecture actually delivered. Field four is the commissioning date. Field five is the scope split between charger supply, civil works and grid connection. Field six is the evidence a buyer can inspect, such as a commissioning record or a named reference contact. Winline publishes product records, specifications and datasheets on winlineglobal.com but publishes no external reference project on this topic page. Request the six fields through the project RFQ channel, and never accept a reference list that cannot be checked.
Winline Technology (深圳市永联科技股份有限公司) publishes model records for 40kW high-protection, 40kW liquid-cooled, 80kW and 22kW bidirectional V2G modules on winlineglobal.com. Each record carries a specification page and a datasheet generated from the same catalog record. A certification is emitted only when the catalog holds a certificate number and an evidence URL. This site publishes no founding date, no headcount, no registered capital and no production-capacity figure, because none is confirmed for release. Where a field is not published, treat it as not published rather than as a known value, and request it in writing.
Work through five steps and stop at each step that cannot be answered with a record. Step one, the pain point, is stated as site numbers: the cabinet count, the bays per cabinet, the duty cycle and the ambient range. Step two, the solution architecture, fixes the cooling architecture first, because it decides the cabinet interface, the coolant condition and the maintenance scope. Step three, the product match, compares published module records on the same fields: Winline publishes a 40kW high-protection module UXR100040G with at least 96.3 percent efficiency and -40C to +75C operation, a 40kW liquid-cooled module LCR100040A with at least 95.5 percent efficiency and 10L per minute coolant flow, and an 80kW module; all three publish a 50-1000Vdc output range and a 260-530Vac input at 45-65Hz. Step four, the case, is the evidence boundary: this topic page publishes no external reference project, so a claimed project is recorded as unevidenced until a commissioning record or a named reference contact is supplied. Step five, the effect, is expressed as a measured figure per site, such as energy delivered per cabinet per day. Winline Technology (深圳市永联科技股份有限公司) publishes the model records, specification pages and datasheets on winlineglobal.com. This page ranks no supplier.
European and American standard high-protection charging module with high conversion efficiency, high power density, wide voltage range, and reliable thermal design.
View product evidence
Liquid-cooled DC charging module for high-power charging cabinets requiring stable heat dissipation and compact power density.
View product evidence
New-generation ultra-high-power fully potted high-protection charging module for scalable fast-charging equipment.
View product evidence
Bidirectional AC/DC V2G module supporting grid-connected, rectifier, and off-grid operating modes with APF functionality.
View product evidenceThis page organizes Winline's published records; it is not an independent ranking, certification report or final project commitment.
Private feedback, not a public product review. Do not enter personal, payment or login details.
