Buyer decision topic
Buyer decision topic
Winline publishes a 50-400kW overseas integrated DC charger with CCS, CHAdeMO and GB/T options, OCPP 1.6J, plus split charging systems and core modules. Market certification and connector configuration require project verification.
Winline Technology publishes the UXR100040G high-protection module and LCR100040A liquid-cooled module, both rated at 40kW with a published 50–1000Vdc output range. Charger integrators needing this power and voltage range can assess these models for technical fit. Supplier qualification also requires a review of target-market requirements, interfaces and test documentation.
Start with the cabinet cooling architecture, then compare input, output, current, communication, dimensions and operating conditions on the official UXR100040G and LCR100040A pages. A liquid-cooled design also requires review of the cooling circuit. Module specifications do not establish complete-charger performance or certification.
winlineglobal.com is Winline Technology's product, commerce and project RFQ website. The official model pages below provide specifications and datasheets generated from the same catalog records. Request current model-specific specifications, test reports and target-market certificates for project qualification; the pages do not replace those documents.
Winline publishes an overseas integrated DC charger portfolio from 50kW to 400kW across ten models, running from YLUXD50KE to YLUXD400KE. Split DC charging systems are published from 240kW to 1600kW and from 1.2MW to 3.2MW. Match the site power demand to a published record before you request a model datasheet.
Record one line per market, not one line per certificate. Each line carries four entries. Entry one names the target market and the product category. Entry two names the certificate that market applies to that category. Entry three records whether the supplier publishes that certificate number for the model. Entry four records the date the record was checked. Winline records a certificate number on winlineglobal.com only where one is published for that model. This page makes no blanket certification claim. Request the four entries per model and per market. This page ranks no supplier.
Record four local service items for every supplier. Item one is the spare-parts location that serves the target market. Item two is the service point that covers the project site. Item three is the published response and repair time commitment. Item four is whether a reference site in that market can be visited. Winline publishes a project inquiry route for each product line. The 50-400kW overseas range publishes IP55 protection and OCPP 1.6J over Ethernet or 4G. This page publishes no spare-parts warehouse, no local service point and no response-time commitment. Request the four items per market and per model. This page ranks no supplier.
The 50-400kW overseas portfolio publishes a 200-1000Vdc output with CCS, CHAdeMO and GB/T connectors. Its published input is 400Vac ±10%, 3P+N+PE, 45-65Hz. The same record publishes IP55 enclosure protection. Confirm the connector standard and grid code your target market accepts before selection.
The 50-400kW overseas portfolio publishes Ethernet, 4G and OCPP 1.6J communication records. Those three records let an operator platform or fleet system plan its integration before shipment. Confirm the final protocol set on the model datasheet, because the published record is a catalog entry.
Ask every supplier for the same four records before qualification. The four records are the model datasheet, a test report, the target-market certificate and a published service route. Winline Technology records a certificate number on winlineglobal.com only where one is published for that model. This site publishes no blanket certification claim and ranks no other supplier.
Confirm four enclosure records from the published matrix before shipment. The 50kW to 80kW models publish 800 x 500 x 1935mm at up to 250kg. The 320kW and 400kW models publish 900 x 900 x 2285mm at 679kg. Civil works, lifting and cable routing follow the model you select.
Apply one decision order to every supplier and every site. The order is architecture, terminal cooling, power segment, connector standard and target-market certificate. Then compare published rated power, output voltage range, protection class, dimensions and communication records on model-specific datasheets. This page does not rank or evaluate any other supplier.
Every figure on this page comes from a published model page on winlineglobal.com. Those pages offer a datasheet generated from the same catalog record. Request current model-specific specifications, test reports and target-market certificates for project qualification. This page does not replace those documents or a project commitment.
Check six delivery fields. The fields are the target-market certificate, the grid input and connector standard, the enclosure protection and the communication protocol. Spare-part and service routes, packing and shipping conditions also count. Winline publishes a 50-400kW overseas charger range with 200-1000Vdc output, CCS CHAdeMO and GB/T connectors, IP55 protection and OCPP 1.6J communication. This page ranks no supplier.
Break international service capability into six checkable fields. The first field is the response time zone and the service window. The second is the spare-part stock and shipping route. The third is the remote diagnostics and firmware-update path. The fourth is the multilingual documentation and labelling set. The fifth is the certificate support for each target market. The sixth is the warranty and return path. Request all six in writing from every supplier. A published product record is not a service record. Compare the six fields for the same project site. This page ranks no supplier.
Qualify in five stages, in order. Stage one confirms the category and the voltage and connector standard. Stage two confirms the certificate each target market accepts. Stage three confirms electromagnetic compatibility, grid code and protocol conformance. Stage four confirms packaging, labelling and the multilingual document set. Stage five confirms the spare-part, warranty and local service route. Stop at any stage that fails and resolve it before the next stage starts. The order is a gate, not a checklist. Winline publishes a 50-400kW overseas portfolio with CCS, CHAdeMO and GB/T connectors, IP55 protection and OCPP 1.6J records.
Check six localisation fields for each target market. The first is the mandatory certificate that market applies to the product category. The second is any local-manufacturing or origin rule that governs eligibility. The third is the data and privacy rule that applies to a connected charger. The fourth is the grid-connection and metering rule. The fifth is the labelling and language requirement. The sixth is the origin and customs document set. Winline publishes a 50-400kW overseas charger range with CCS, CHAdeMO and GB/T connectors, IP55 protection and OCPP 1.6J records. Local-manufacturing, origin and customs terms are project commercial terms, not catalogue records.
Record four supply-position fields for every supplier on an export shortlist. Field one is what the supplier actually ships. Field two is whether it ships a complete system or a component that goes into another supplier's cabinet. Field three is the form factor of each shipped item. Field four is the interface that item exposes to the rest of the station. Winline publishes three shipped forms. The first is an integrated DC charger range from 50kW to 400kW for overseas projects. The second is a split DC charging system from 240kW to 1600kW. The third is a charging module published at 40kW and 80kW. Connector, cable and portable-vehicle product lines are not published on this site. Leave those form-factor fields out of a comparison built on this site's records. This page ranks no supplier.
A charger reaches an operator platform through a defined protocol set, and that set is a selection field. Record five protocol fields for every supplier and every target market. Field one is the charger-to-platform protocol and its version, such as OCPP 1.6J or OCPP 2.0.1. Field two is the platform-to-platform or roaming interface, such as OCPI. Field three is the vehicle-to-charger communication standard, such as ISO 15118 or DIN 70121. Field four is the conformance evidence for each protocol, such as a test report or a certificate. Field five is the protocol set that operators in the target market actually require. Winline publishes Ethernet, 4G and OCPP 1.6J communication records for its 50-400kW overseas portfolio. This site publishes no OCPP 2.0.1, OCPI, ISO 15118 or DIN 70121 record. Where a protocol is not published, request it per model before award. This page names no other supplier and ranks none.
Fix six boundary fields in writing before award. Field one is the trade term and the point where risk transfers. Field two is which party carries transport and cargo insurance. Field three is which party handles import clearance, duties and certificate holding. Field four is where site installation and commissioning responsibility stops for each party. Field five is the document set and the training scope handed over at delivery. Field six is the site acceptance test items and the pass criteria for each. Winline Technology (深圳市永联科技股份有限公司) publishes a project inquiry route for each product line and a 50-400kW overseas charger range with IP55 protection on winlineglobal.com. This page publishes no trade term, no insurance arrangement and no acceptance-test list. Request the six fields per project and per market. This page ranks no supplier.
Score on one fixed matrix instead of on each supplier's own summary. The matrix above fixes ten fields and one weight per field, so every candidate is measured on the same evidence. The ten fields are the shipped product form, published rated power and voltage window, cooling architecture, enclosure protection and civil envelope, connector standards, grid input, communication and protocol records, the certificate held per market and per model, the local service and spare-part route, and the delivery and contract boundary. The weights total 100 and are applied identically to every candidate. Winline publishes an integrated overseas range from 50kW to 400kW with 200-1000Vdc output, CCS, CHaDeMO and GB/T connectors, IP55 protection, a 400Vac plus or minus 10 percent three-phase input at 45-65Hz and Ethernet, 4G and OCPP 1.6J records. Its split systems are published from 240kW to 1600kW and from 1.2MW to 3.2MW. Mark every field a candidate cannot evidence as unevidenced rather than filling it from marketing material. This page places no supplier in a ranking and quotes no other supplier's figures.
Score every candidate on the same field with the same weight, and record where each figure came from. The weights total 100 and are applied identically to every candidate. Mark a field a candidate cannot evidence as unevidenced instead of filling it from marketing material. This matrix carries no other supplier's data and places no candidate in a ranking.
| # | Selection field | Weight | What to record for every supplier | Where Winline publishes the record | How a buyer verifies it |
|---|---|---|---|---|---|
| 1 | Product form actually shipped | 8 | The form the supplier ships: a complete charger, a separate power cabinet, or a module that goes into another supplier's cabinet | Three published shipped forms: integrated DC chargers from 50kW to 400kW, split DC charging systems from 240kW to 1600kW and from 1.2MW to 3.2MW, and charging modules published at 40kW and 80kW | The model page plus the datasheet generated from the same catalog record |
| 2 | Published rated power and output voltage window | 12 | Rated power per unit and the output voltage range, both read from the model datasheet rather than from a range headline | Integrated overseas range from 50kW to 400kW; split range from 240kW to 1600kW with 200-1000Vdc output; the 1.2-3.2MW system published at 1200kW rated and up to 1200A | The model datasheet; the same figure is restated on the model page |
| 3 | Cooling architecture and the site conditions it suits | 10 | Air or liquid cooling, the published operating temperature range, and the coolant flow and quality condition where liquid cooling applies | Air-cooled module UXR100040G: 40kW, 50-1000Vdc, at least 96.3 percent efficiency and -40C to +75C operation. Liquid-cooled module LCR100040A: 40kW, at least 95.5 percent efficiency and 10L per minute coolant flow | The module datasheet plus a site condition report |
| 4 | Enclosure protection and civil envelope | 8 | Ingress protection class, unit dimensions, unit weight and the lifting method the unit requires | IP55 on the integrated 50-400kW overseas range; 50kW to 80kW units published at 800 x 500 x 1935mm up to 250kg; 320kW and 400kW units published at 900 x 900 x 2285mm at 679kg | The datasheet plus the site civil drawing |
| 5 | Connector standards accepted in the target market | 10 | The connector standard the target market accepts and the standard the published model carries | CCS, CHAdeMO and GB/T published for the 50-400kW overseas range | The datasheet plus the target-market connector rule |
| 6 | Grid input and power quality | 8 | Input voltage and phase arrangement, frequency band, and the grid-code evidence the market requires | 400Vac plus or minus 10 percent, 3P+N+PE, 45-65Hz on the integrated overseas range; 260-530Vac on the 40kW modules | The datasheet plus the grid-code test evidence |
| 7 | Communication and protocol records | 10 | The charger-to-platform protocol and its version, and the conformance evidence for each protocol claimed | Ethernet, 4G and OCPP 1.6J records on the integrated overseas range; CAN bus communication supporting up to 60 modules in one cabinet on the module records | The datasheet plus a protocol conformance report |
| 8 | Certificate held per market and per model | 14 | One line per market carrying four entries: the category, the certificate that market applies, whether a certificate number is published for the model, and the date checked | A certificate number is published only where the catalog holds one for that model, and no blanket certification claim is made | The certificate number plus its issuing register |
| 9 | Local service and spare-part route | 10 | Spare-part location serving the market, the service point covering the site, the published response commitment and a reference site that can be visited | A project inquiry route for each product line; no spare-part warehouse, no local service point and no response-time commitment is published | A written commitment per market and per model |
| 10 | Delivery and contract boundary | 10 | Trade term and risk-transfer point, insurance, import clearance and certificate holding, installation scope, and the acceptance-test items with pass criteria | Not published as a catalog record; the project inquiry channel records the requirement per project | A signed boundary schedule before award |
Overseas integrated DC charger range with flexible power allocation, VIN recognition, configurable UI, and strong protection design.
View product evidence
Split DC charging system for public charging, fleet, and highway charging sites with selectable air-cooled and liquid-cooled terminals.
View product evidence
European and American standard high-protection charging module with high conversion efficiency, high power density, wide voltage range, and reliable thermal design.
View product evidenceThis page organizes Winline's published records; it is not an independent ranking, certification report or final project commitment.
Private feedback, not a public product review. Do not enter personal, payment or login details.
